How to Upload Youtube Video to Audacity

The easiest way to use Audacity is to import an existing audio file and brand small changes. If yous have never used Brazenness earlier, this is a great place to start.

If you accept but made a recording it is strongly recommended that you immediately consign your audio using to WAV or AIFF (ideally to an external drive) as a safety re-create before you start editing the project.

Objective

The objective of this tutorial is to acquire how to edit an audio file. To achieve this objective, we are going to import an existing sound file, remove all but 10 seconds of this file, apply a i-second fade-out at the finish, export the results, and play it in your favorite audio player. These steps will innovate the bones steps commonly used when editing the contents of an audio file.

Footstep one: Notice a file to edit

Audacity tin can import many common audio file formats, including WAV , AIFF , and MP3 . If the optional FFmpeg library is installed, a larger range of formats, including WMA and the audio content of most video files, can be imported. Audacity cannot import copy-protected music files.

If yous want to edit music that y'all accept on an audio CD , yous need to "rip" the music into an audio file. See the Audio CDs page for information on getting the audio off of CDs and into Audacity.

No audio files handy? There is lots of free music online.

Step two: Import the file into Audacity

First launch Audacity, then import an sound file by selecting .

A quicker method is to just drag and drib the file as in the following examples:


	Windows: Drag the audio file icon into the open Audacity window.		Mac: Drag the audio file icon to the Audacity icon in the Dock (does not work for all formats yet).		Linux: Drag the sound file icon into the open Audacity window.

All three platforms support:

dragging the audio file into the Audacity window
dragging the audio file to the Audacity icon on the Desktop.

Specific dragging behavior according to platform:

On Windows and Mac yous can likewise drag to Audacity'southward icon in a file managing director application.
On Mac and Linux yous can drag the file to the Audacity icon in the Dock or Taskbar respectively to import the file into Audacity.
- On Windows, dragging the file to the Audacity icon in the Taskbar will either switch the window to Audacity if it is running (from where yous tin drag the file in), or if Audacity is airtight, give the option to launch Audacity with the file imported.

Command-line file importing: On all 3 platforms yous can also import files by launching Brazenness at the control-line and passing the files you wish to import as arguments. For case, on Linux Ubuntu:

[e-mail protected]:~$ brazenness Desktop/vocal.mp3 Desktop/speech communication.wav

imports the "song.mp3" and "speech.wav" files located on the Desktop in separate Audacity windows.

Step 3: Look at the waveform

Stereo waveform in a track

This image above shows a stereo waveform. The left aqueduct is displayed in the top half of the track and the right channel in the lesser one-half. The rails proper name takes the name of the imported audio file ("No Boondocks" in this example). Where the waveform reaches closer to the top and lesser of the track, the audio is louder (and vice versa).

The ruler above the waveform shows yous the length of the audio in minutes and seconds.

Removing any DC commencement (if present)

DC offset tin occur in audio files and so that the recorded waveform is not centered on the horizontal line at 0.0 amplitude . Information technology can exist caused by recording with a faulty sound interface. The example above is centered on 0 correctly and carries no DC kickoff. If your waveform is not centered, run across the Normalize folio for how to apply Normalize to remove DC offset and how to check if your Windows sound device can perform this correction automatically.

Step 4: Heed to the imported audio

Annotated Transport Toolbar.png

The image above shows Ship Toolbar.

Click the Play button to listen to the sound. Click the Stop button to stop playback. If you do not hear anything, see Brazenness Setup and Configuration.

You can use the Infinite primal on the keyboard as a shortcut for Play or Stop.

Click on Selection Tool then click on the waveform to choose a place to starting time, and then click the Play button . Click and drag to create a choice, and so when you click Play button only the choice will play.

Keyboard use: You can select audio entirely using the left arrow, right arrow and other keys.

Press Left or Right to move the cursor left or right respectively in the waveform.
Concord down Shift while pressing Left or Correct to create then extend a option leftwards or rightwards respectively.
Hold down Shift and Ctrl while pressing Left or Right to contract an existing selection leftwards or rightwards respectively.

Clicking the Skip to Offset button or pressing the Home key will move the cursor to the first of the track. It is like rewind, simply it is non for playback - information technology will only work when playback is stopped.

Similarly, clicking the Skip to End button or pressing the End key will move the cursor to the end of the track.

To jump the playback position forwards or backwards from where it is at present, click on the Timeline higher up the waveform at the point yous wish to hear.

Keyboard use: You tin can use the following keys to skip around the sound file while listening.

Press Left or , to move the playback cursor back one 2d.
Press Right or . to move the playback cursor frontward one second.
Press Shift + Left or Shift + , to move the playback cursor back 15 seconds.
Press Shift + Right or Shift + . to move the playback cursor forward 15 seconds.

The amount the cursor moves in this situation is called the "seek time". The long and curt seek times (one second and 15 seconds in the examples above) can be set in the Seek Fourth dimension When Playing section of Playback Preferences.

Step v: Create a x-second clip from your audio

You edit audio waveforms in Brazenness in much the same style as y'all would edit text in a discussion-processing document. When you lot are editing text you commencement select the text you desire to change and then choose what you lot want to do with it. You might want to cutting or copy the text, delete it, paste new text in its place, or modify it to bold. You do the same thing in Audacity: kickoff zoom and select the range of audio you want to modify, so choose what you want to do with it.

The image higher up shows Edit Toolbar with the Zoom buttons highlighted. This is the Zoom In tool, and this is the Zoom Out tool.

To zoom in to get a closer await at the waveform, showtime choose the Selection Tool , so click near the point you are interested in, and then click the Zoom In button. Keep clicking the Zoom In button until you see the detail you need. Note that when you click the Zoom In button the cursor is centered on the screen.

There are also card commands and keyboard shortcuts for zooming. (or Ctrl + 1) is the aforementioned as clicking the Zoom In push. (or Ctrl + 3) is the same every bit clicking the Zoom Out push button. (or Ctrl + F) will zoom the waveform then information technology fits in the window.

Use the Zoom commands so that you lot tin make maximal employ of your Audacity window to encounter as much item as you demand, or to make sure yous see the entire file when necessary.

Walk through deleting all only approximately 10 seconds of selected sound

To cut this audio file down to exactly x seconds, use these following steps.

These steps require a mouse, except for using Space on the keyboard to play the choice and C to play either side of the selection. See below for how to create and adjust selections using the keyboard.

With playback stopped, click virtually the point where you desire the 10-second piece to brainstorm.
Zoom in until the Timeline shows 10 seconds or more than before and after the cursor.
While holding down the Shift key, click 10 seconds to the right of the cursor.
- Notation that this is just like selecting a range of text in a discussion processor
Press Space to listen to the entire selection. Playback will stop when the stop of the selection is reached.
Conform the start and end of the selection with the mouse equally follows.
- five.ane. Motion the pointer over the outset of the choice - the cursor will change to a left-pointing hand.
- 5.2. Click and drag to adjust the beginning of the selection.
- 5.three. You tin can adjust the end of the selection in a similar style.
Printing Space to listen to the adapted choice. Y'all do not accept to listen to all of it; press Space once again at whatever time to cease playback.
- A convenient fashion to listen to only the adjusted start of the selection is to move the mouse pointer a little after the start of the option then press B. The pick plays from the commencement of the selection to the pointer. To hear the adjusted end of the selection, move the arrow close to the selection end, then press B to play from the pointer to the choice end.
- You lot can besides play a length of audio either side of the option by pressing C. This lets you make certain there is no audio you desire to go on that will be removed. Playing either side of the selection would also be useful if you later wanted to cut a small piece out of that selection - you would select the small piece to be cutting, then could preview how the sound would sound after the cut. To adapt the length of audio played before and after the pick, go to Cut Preview in the Playback Preferences.

Keyboard employ: Utilise the arrow keys to adjust the selection first and end.

Pressing Shift + Left will expand the option to the left.
Pressing Shift + Right will expand the selection to the right.
Pressing Shift + Ctrl + Left will contract the selection from the right.
Pressing Shift + Ctrl + Right volition contract the selection from the left.

Keyboard use: Use Selection Toolbar to create or adapt a pick.

Without a mouse, employ Ctrl + F6 to navigate into Selection Toolbar, then Tab betwixt the controls.
In "Selection Start", type the starting point of your selection if there is not yet a selection.
Select the Length radio push above the 2d group of numbers in Choice Toolbar if it is non yet selected.
If there is no option yet, select the digit subsequently the "1000" in the "Length" box and blazon 1 (1) on your keyboard. This selects exactly 10.000 seconds from the starting indicate you lot chose.
Once in that location is a selection, you tin adjust its length in the aforementioned way. Let's suppose yous dragged a trivial less than x seconds in the waveform, but you need the choice to be exactly 10 seconds.
1. Select the start digit to the right of the decimal point in the "Length" box.
2. Type 0 (zero) - the digit changes to zero, the digit to the right is selected and the selection in the waveform changes to match.
3. Blazon 0 (zero) twice more than - the pick length is at present 10.000 seconds, accurate to one thousandth of a second.

Yous have now selected the portion of the audio that y'all want to keep. Make sure y'all have pressed Space to stop if the rails is still playing, then to delete everything except the selected sound, click on .

If you make a error, you tin always click on . Audacity has unlimited Undo and Redo. You can undo your editing deportment all the way back to when yous imported the file. You tin can also Redo actions that you take undone.

You now have a region of audio that starts several seconds (or perhaps minutes) from the starting time of the track. You could move the sound to the beginning of the track, using , but this is not a necessary step considering when exporting, Audacity volition ignore the white space betwixt time cipher and the start of the audio.

Step 6: Fade out the last 2d

Click the Skip to End button .
Zoom In until you lot tin can see the last two or iii seconds of the waveform.
Click in the waveform about 1 second before the end.
Click on .
Click on . The terminal 2d of the audio is smoothly faded out.

Note that we always select some sound first, then choose what activeness we want to perform on information technology.

Stride 7: Export the resulting file

When you save an Audacity project with y'all are doing but that - saving an Audacity project. Audacity projects can be opened simply by Audacity. If you want other applications (such every bit Apple tree Music/iTunes or Windows Media Player) to be able to open this file you need to export it.

Before nosotros export this 10 second clip to a separate file nosotros are going to simplify things a bit. Go to the Import / Export Preferences, and nether When exporting tracks to an audio file uncheck "Show Metadata Editor prior to export step". Metadata Editor adds actress information about the speech or music into the file - see For More than Information below to larn more. You can go back to the Import / Consign Preferences at any fourth dimension to re-enable Metadata Editor.

Exporting a WAV file

Click on - the standard "Save" dialog for your operating system appears.
Give the file a different name. Audacity ever suggests a proper noun for the file that is the same as the name of your Audacity project. Information technology is always best to alter this so you lot exercise non confuse your exported file with your Audacity project.
Choose a location to salve the file in the usual fashion.
At the bottom of the Relieve dialog is a dropdown menu labeled "Format". From this menu choose "WAV (Microsoft) signed 16-bit PCM".
There are no options for the WAV file format, and then in that location is no need to click the Options button.
Click the Salve button to complete the export of your project to a WAV file.

Exporting an MP3 file

The steps for exporting a file in MP3 format are the aforementioned as for a WAV file, except:

In the Salvage dialog, from the "Format" menu, choose "MP3 files"
And then click the Options button to set up the flake rate and other options for the MP3 file.

Step eight - Testing your new Sound Product

To demonstrate the difference betwixt an Audacity projection (the AUP) file, and a sound file you export from an Audacity projection:

Click on , saving changes if asked.
Find the AUP file on your computer and endeavor to open information technology with the audio player of your selection (for example iTunes, Windows Media Player). You cannot.
Detect the exported WAV file on your estimator and endeavour to open information technology with the audio histrion of your choice. Success!

You cannot open an Audacity projection in a media player. Only by exporting your project can you heed to it in a media histrion.

Once you lot have exported your project you may want to go along the original project file (AUP3) around in case you want to make some changes to information technology in the future.

Where to go from here

More tutorials

Tutorial - Your Beginning Recording
Tutorial - Mixing a Narration With Background Music

For more than information

Opening or Importing Sound Files: File Bill of fare > Open, File Carte du jour > Import
Tracks and Waveforms: Audio Tracks, Audacity Tracks and Clips, Brazenness Waveform
Playing a file: Playing and Recording
Editing a track: Edit Carte du jour, Zooming
Effects: Effect Carte du jour
Saving: Audacity Projects
Exporting: File Card > Export...
Metadata Editor: Metadata Editor
MP3 Export Options: MP3 Export Options

abbotttheming.blogspot.com

Source: https://manual.audacityteam.org/man/tutorial_editing_an_existing_file.html